RISH Relay - AR monitors AC current of a system/equipment and protects it from overcurrent, undercurrent and current unbalance. As well as it indicates the occurrence of faults with help of LED indications. It is a potentiometer based relay thus it is easy to programme trip points and time delays.

• Over Current, Under Current& Current Unbalance Protection
• Nominal current can be set from 1A - 5A on-site
• Adjustable trip point and time delay for Under current and Over current
• Compliance to International Safety standard IEC 61010-1- 2010
• TRMS measurement
• LED indication for Power on, & faults like Under current, Over current, Current unbalance

The RISH CON - M transducer is used to measure and convert parameter of Three-phase 3W/4W AC Bal./Unbal. It ensures that the measurement and conversion of measured values into standard analog current signals. Relay / Pulse outputs.

Rishducer E13 convert a 3 sine waves AC voltage (upto 750V) or Current (upto 10A) of sine waveform into proportional 3 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring, calibration to RMS with sine waveform, AC or DC Aux supply

M01 is a programmable with RS485 bus interface, enable users to determine and supervise several parameter of electric power system with Modbus (RS485), power system Simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting. Universal aux.

M40/30 simultaneously measure several variables of electric power system and converts them into 3 or 4 analog output, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting, universal Aux

The Wide range of Rish Rotary CAM switches cover most application with different contact design, contact material and terminals allow their use as control switches, instrumentation switches , motor control switches and Electronic circuitory.

Spring Return Switches provide contacts that are held closed only when the switch is turned against the mechanism spring. The mechanism returning the contacts to their original state upon release of the actuator. This type of switches are known as ''Momentary switches''.

• Compact Design
• 60 & 90 Degree Angle of Throw
• Flag Type Knob Handle
• Spring Loaded Mechanism
• Standard Mounting Plate
• IP 20 (16A)

Rish X’mer CTs are square type and encapsulated with UL94V-0 approved polycarbonate. Metering CTs feature with wire sealable terminal covers & wide range of primary current ratings, Bus bar sizes, case widths.  Wall, cable, bus bar & DIN rail mounting options available.

Rish Shunts provide DC millivolt signal proportional to higher DC current to drive ammeter indicators, overload protection and control devices. These are made from Manganin material. Available from 1A to 3000A with an accuracy 0.5 & 1%. Standard voltage drop is 50, 60, 75 &150mV.

DE48, DE72, DE96 and DE144 Moving Iron meters measure true rms AC Voltage or AC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

DS48, DS72, DS96 and DS144 Moving Coil meters measure average DC Voltage or DC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).  

EVR Series là dòng Rơ le điện áp cao DC được sử dụng rộng rãi trong xe ô tô điện, xe hybrid, xe chạy pin nhiên liệu, năng lượng mặt trời, năng lượng gió, cung cấp điện cho máy chủ đám mây (Cloud Server), hệ thống sạc và xả pin (EV Charging Station), thiết bị điều khiển điện áp nguồn DC và máy móc hạng nặng, thiết bị nâng hạ siêu trọng.