EVHB Series là dòng Rơ le điện áp cao DC không phân cực (Bi-directional switching device) được sử dụng rộng rãi trong xe ô tô điện, xe hybrid, xe chạy pin nhiên liệu, năng lượng mặt trời, năng lượng gió, cung cấp điện cho máy chủ đám mây (Cloud Server), hệ thống sạc và xả pin (EV Charging Station), thiết bị điều khiển điện áp nguồn DC và máy móc hạng nặng, thiết bị nâng hạ siêu trọng.

YM Tech DC Contactors được thiết kế để phù hợp với nhiều ứng dụng bao gồm xe nâng điện, tời DC, xe điện, và gần đây là ngành viễn thông.

Rơ le (relay) là một công tắc chuyển đổi hoạt động bằng điện. Nói là một công tắc vì rơ le có 2 trạng thái ON và OFF. Rơ le ở trạng thái ON hay OFF phụ thuộc vào có dòng điện chạy qua rơ le hay không.

Multipole pluggable lightning current arrester for the use in TNS, TT and TNC systems, with rare-gas-filled spark gap. They provide extremely high dischar-ge cappabilities with at the same time very low protection levels and they also do not need any damageable internal or external electronic trigger.

• Applicable at the boundaries LPZ 0A - 1
• Test standard: IEC 61643-11 / EN 61643-11
• Vibration test standard: DIN EN 60068-2-6, IEC 60068-2-6
• Shock test standard: DIN EN 60068-2-27, IEC 60068-2-27
• Mounting on 35 mm DIN rail (EN 60715)
• Enclosure material: thermoplastic with the colors yellow and black
• Degree of protection according to IEC EN 60529: IP 20
• Inflammability class according to UL 94 V0
• EAC certification
• No leakage currents, thus, allowing installation upstream of power meters
• Optical sattus indication (red pin appears)
• Single modules can be replaced easily
• Remote changeover contact
• operating voltage remote contact: 250 V AC/125 V DC
• operating current remote contact: 1 A AC/200 mA DC
• locking torque FM terminals: 0,25 Nm

Lightning current discharge arrester with rare-gas-filled spark gap and very low protection level < 1.5 kV for the use in three-phase TNS, TT aund TN systems. They provide extremely high discharge cappabilities with at the same time very low protection levels and they also do not need any dama-geable internal or external electronic trigger.

• Applicable at the boundaries LPZ 0A - 2
• Test standard: IEC 61643-11 / EN 61643-11
• Vibration test standard: DIN EN 60068-2-6, IEC 60068-2-6
• Shock test standard: DIN EN 60068-2-27, IEC 60068-2-27
• Mounting on 35 mm DIN rail (EN 60715)
• Enclosure material: thermoplastic with the colors yellow and black
• Degree of protection according to IEC EN 60529: IP 20
• Inflammability class according to UL 94 V0
• EAC certification
• Remote changeover contact
• No leakage currents, thus, allowing installation upstream of power meters
• Optical sattus indication (red pin appears)
• Single modules can be replaced easily
• operating voltage remote contact: 250 V AC/125 V DC
• operating current remote contact: 1 A AC/200 mA DC
• locking torque FM terminals: 0,25 Nm

Combined surge arrester with rare-gas-filled spark gap and very low protec-tion level < 1.0 kV for the use in three-phase TT, TNC and TNS systems. They provide extremely high discharge cappabilities with at the same time very low protection levels and they also do not need any damageable internal or external electronic trigger.

• Applicable at the boundaries LPZ 0A - 2
• Test standard: IEC 61643-11 / EN 61643-11
• Vibration test standard: DIN EN 60068-2-6, IEC 60068-2-6
• Shock test standard: DIN EN 60068-2-27, IEC 60068-2-27
• Mounting on 35 mm DIN rail (EN 60715)
• Enclosure material: thermoplastic with the colors yellow and black
• Degree of protection according to IEC EN 60529: IP 20
• Inflammability class according to UL 94 V0
• EAC certification
• Remote changeover contact
• No leakage currents, thus, allowing installation upstream of power meters
• Optical sattus indication (red pin appears)
• Single modules can be replaced easily
• operating voltage remote contact: 250 V AC/125 V DC
• operating current remote contact: 1 A AC/200 mA DC
• locking torque FM terminals: 0,25 Nm

Multipole lightning current arrester for the use in 1, 2 and 3 phase TNS, TT, TNC, TN and IT systems. The arresters can be installed at the transition 0A to 1 according to the lightning protection zones concept. The SPDs of the series PowerPro B feature a high thermal resistance and an outstanding
discharge capability for lightning impulse currents of 50 kA (10/350 µs) per pole. Therefore, they can be applied according to DIN EN 62305 (VDE 0185-305).

• Test standard: IEC 61643-11 / EN 61643-11
• Discharge capacity up to 100 kA (10/350 µs)
• High insulation resistance
• High quenching of follow-on short-circuit currents
• Operates independently of atmospheric air pressure and ambient humidity
• All-in-one protection unit, ready for connection
• Degree of protection according to IEC EN 60529: IP 20
• Mounting on 35 mm DIN rail (EN 60715)
• Inflammability class according to UL 94 V0
• EAC certification
• Remote signalling contact (FM): break contact
• Switching capacity FM: 250 V/2 A
• conductor cross section FM: 1,5 mm²

Multipole combined arrester for the use in 1, 2 and 3 phase TNS, TT, TNC, TN and IT systems. The arresters can be installed at the transition 0A to 2 according to the lightning protection zones concept. The SPDs of the series PowerPro BC feature a high thermal resistance and an outstanding dischar-ge capability for lightning impulse currents of 50 kA (10/350 µs) per pole. Therefore, they can be applied according to DIN EN 62305 (VDE 0185-305).

• Test standard: IEC 61643-11 / EN 61643-11
• Discharge capacity up to 100 kA (10/350 µs)
• All-in-one protection unit, ready for connection
• No leakage currents, thus, allowing installation upstream of power meters
• Degree of protection according to IEC EN 60529: IP 20
• Mounting on 35 mm DIN rail (EN 60715)
• Inflammability class according to UL 94 V0
• EAC certification
• Remote signalling contact (FM): break contact
• Switching capacity FM: 250 V/2 A
• conductor cross section FM: 1,5 mm²

Multipole compact combined arresterfor the use in 1, 2 and 3 phase TNS, TT, TN, TNC and IT systems. The installation place of the PowerPro BCD is the main distribution board upstream or downstream of the power meter. Accor-ding to the lightning protection zones concept in IEC DIN EN 62305 part 1-4 (VDE 0185-305-1-4), it can universally be installed at the transition 0A to 2.

• Test standard: IEC 61643-11 / EN 61643-11
• No leakage currents, thus, allowing installation upstream of power meters
• Rare-gas-filled spark gap, hermetically sealed
• Discharge capacity up to 100 kA (10/350 µs)
• All-in-one protection unit, ready for connection
• Operates independently of atmospheric air pressure and ambient humidity
• Inflammability class according to UL 94 V0
• EAC certification
• Remote signalling contact (FM): break contact
• Switching capacity FM: 250 V/2 A
• conductor cross section FM: 1,5 mm²

Combined modular and compact multi-pole arrester for 1-, 2- and 3-phase TT, TNC and TN systems. The installation place of the PowerPro BCD is the main distribution board upstream of the power meter. According to the lightning protection zones concept in IEC DIN EN 62305 part 1-4 (VDE 0185-305-1-4), it can universally be installed at the transition 0A to 2.

• Test standard: IEC 61643-11 / EN 61643-11
• Monitoring of conductor and arrester via LED
• Not leackage current free
• Discharge capacity up to 100 kA (10/350 µs)
• All-in-one protection unit, ready for connection
• Rare-gas-filled spark gap, hermetically sealed
• Serial wiring with multi-functional terminals
• Operates independently of atmospheric air pressure and ambient humidity
• Inflammability class according to UL 94 V0
• EAC certification
• Remote signalling contact (FM): break contact
• Switching capacity FM: 250 V/2 A
• conductor cross section FM: 1,5 mm²

Multipole lightning current arrester type 1 for the use in 1 , 2 and 3 phase TNS, TT, TNC, TN and IT systems, for protection of low-voltage consumers’ installations in business and residential areas against surges caused by lightning or switching actions in the network. The arresters can be installed at the transition 0A to 1 according to the lightning protection zones concept.

• Test standard: IEC 61643-11/EN 61643-11
• Rare-gas-filled spark gap, hermetically sealed
• No leakage currents, thus, allowing installation upstream of power meters
• Operates independently of atmospheric air pressure and ambient humidity
• High insulation resistance
• Discharge capacity up to 100 kA (10/350 µs)
• All-in-one protection unit, ready for connection
• Mounting on 35 mm DIN rail (EN 60715)
• Degree of protection according to IEC EN 60529: IP 20
• Inflammability class according to UL 94 V0
• EAC certification
• Remote signalling contact (FM): break contact
• Switching capacity FM: 250 V/2 A
• conductor cross section FM: 1,5 mm²

Multipole lightning current arrester type 1 + 2 for the use in 1 , 2 and 3 pha-se TNS, TT, TNC, TN and IT systems, for protection of low-voltage consumers’ installations in business and residential areas against surges caused by lightning or switching actions in the network. The arresters can be installed at the transition 0A to 2 accord-ing to the lightning protection zones concept.

• Test standard: IEC 61643-11 / EN 61643-11
• All-in-one protection unit, ready for connection
• No leakage currents, thus, allowing installation upstream of power meters
• Degree of protection according to IEC EN 60529: IP 20
• Mounting on 35 mm DIN rail (EN 60715)
• Inflammability class according to UL 94 V0
• EAC certification
• Remote signalling contact: break contact
• Switching capacity FM: 250 V/2 A
• conductor cross section FM: 1,5 mm²