RGS-PR9000 Series

RGS-PR9000 is Layer-3 modular managed redundant ring Ethernet switch with 4 slots. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613

 

RGS-PR9000 is Layer-3 modular managed redundant ring Ethernet switch with 4 slots. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 85 oC (If use 10G SFP module then operating temperature is -20°C ~ 60°C). RGS-PR9000 can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application. 

Features

  -  Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613

  -  Modular designed makes network planning easy

  -  Supports Layer 3 routing, RIP and static routing function

  -  Supports GRE (Generic Routing Encapsulation) tunneling protocol

  -  Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet Redundancy

  -  O-Chain allow multiple redundant network rings

  -  *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function

  -  Support IEEE 1588v2 clock Synchronization

*NOTE: This function is available by request only

 Specifications
ORing Switch ModelRGS-PR9000-LVRGS-PR9000-HV
Physical Ports 

Slot Number

4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port)
Technology 
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table32K
Priority Queues8
ProcessingStore-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 128Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define

Jumbo frameUp to 10K Bytes
Security Featues

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
MAC-based authentication
MAC address limit
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Web and CLI authentication and authorization
IP source guard

Software Features

Hardware routing, RIP and static routing
IEEE 1588v2 clock synchronization
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
Multiple Registration Protocol (MRP)
MSTP (RSTP/STP compatible)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP v2/v3 Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client
DHCP Relay
Modbus TCP
SMTP Client
SNTP Server

Network Redundancy

O-Ring
O-Chain
*note MRP
MSTP(RSTP/STP compatible)

RS-232 Serial Console PortRS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1
LED Indicators 
Power Indicator (PWR)Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2)Green : Power LED x 2
Ring Master Indicator (R.M.)Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)

Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.

Fault Indicator (Fault)Amber : Indicate unexpected event occurred
Reset To Default Running Indicator (DEF)Green : System resets to default configuration
Supervisor Login Indicator (RMT)Green : System is accessed remotely
Smart LED Display system

Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Mode select Button (MODE) : Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28

Fault Contact 
RelayRelay output to carry capacity of 1A at 24VDC
Power 
Redundant power input modularDual 24/48VDC (24~72VDC) power inputs at terminal block (Note 2)

Dual 100~240VAC / 100~370VDC power inputs at terminal block

Power Consumption (Typ.)46Watts max.43.5Watts max.
Overload Current ProtectionPresent
Physical Characteristics 
Enclosure19 inches rack mountable
Dimensions (W x D x H)440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches)
Weight (g)6450 g6600 g
MTBF(mean time between failures) 
Time246,537hrs (Note 1)246,537hrs (Note 1)
Environmental 
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature24VDC~36VDC
10G SFP+ module absent : -40 to 75°C

10G SFP+ module absent : -40 to 85°C
10G SFP+ module used: -20 to 60 °C

24VDC~36VDC
10G SFP+ module used: -20 to 50 °C
36VDC~72VDC
10G SFP+ module absent : -40 to 85°C
36VDC~72VDC
10G SFP+ module used: -20 to 60 °C
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals 
Power AutomationIEC 61850-3, IEEE 1613
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
EMCEN50121-4 (EN50121-1)
SafetyUL 60950-1
TransportNEMA TS1&TS2
Warranty5 years

                                                Note 1: The value is calculated under the combination of 3 SWM-80GT and 1 SWM-04GP+ module.
                                                Note 2: Different DC power input have different operating temperature.
                                                *NOTE: This function is available by request only

Bình luận