RGS-PR9000-A Series

RGS-PR9000-A is advanced Layer 3 modular managed redundant ring Ethernet switch with 3 module slots.  The switch is designed for power substation application, fully compliant with the requirement of IEC 61850-3, IEEE 1613.

RGS-PR9000-A is advanced Layer 3 modular managed redundant ring Ethernet switch with 3 module slots.  The switch is designed for power substation application, fully compliant with the requirement of IEC 61850-3, IEEE 1613. It also supports routing protocols OSPF which are suitable for large scale network environment. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 20ms) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.  Otherwise, support wide operating temperature from -20 oC to 60 oC when running with 10G ports, and it’s up to -40 oC to 75 oC without 10G ports.  RGS-PR9000-A can also be managed centralized and convenient by Open-Vision, besides the Web-based interface, Telnet and console (CLI) configuration.  Therefore, the switch is one of the most reliable choices for power substation application.

Features

  -  Designed for power substation fully compliant with the requirement of IEC 61850-3 and IEEE 1613

  -  Modular designed makes network planning easy

  -  Support static routing and route redistribution for IPv4 and IPv6

  -  Support routing protocols – RIP v1/v2, OSPF, DVMRP, PIM-SM, PIM-DM

  -  Support VRRP for router redundancy

  -  Support O-Ring (recovery time < 30ms) and MSTP (RSTP/STP compatible) for Ethernet Redundancy

  -  O-Chain allow multiple redundant network rings

  -  Support Modbus TCP

  -  Provided HTTPS/SSH/SSL protocol to enhance network security

  -  Support IEEE 802.3az Energy-Efficient Ethernet technology

  -  Support SMTP client and SNTP server protocol

  -  Support TFTP transmission protocol

  -  Support IP-based bandwidth management

  -  Support application-based QoS management

  -  IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic

  -  Support SNMP v1/v2c/v3 & 802.1Q VLAN Network Management

  -  Support multicast MIB (RFC 2932)

  -  Support port mirror function to monitor port data

  -  Support ACL, TACACS+ and 802.1x User Authentication for security

  -  Support 10KBytes Jumbo Frame

  -  Multiple notification for warning of unexpected event

  -  Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration

  -  Support multiple levels of CLI user privileged

  -  Support backup unit device DBU-01 to quickly configuration backup/restore

  -  Support redundant power inputs with optional voltage range

  -  19 inches rack mountable design

 Specifications
ORing Switch ModelRGS-PR9000-A-LVRGS-PR9000-A-LV (10G)RGS-PR9000-A-HVRGS-PR9000-A-HV (10G)
Physical Ports 

Slot Number

3

10G Base-X with SFP+ port

NA4NA4
Technology 
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

CPUCore clock 800MHz
SDRAM SizeDDR2 512MBytes
Flash ROM Size64MBytes NAND Flash
MAC Table16K
ProcessingStore-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 128Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define

Jumbo frameUp to 10K Bytes
Security Featues

Enable/disable ports, MAC based port security
Port based network access control (802.1x)
MAC-based authentication
VLAN (802.1Q ) to segregate and secure network traffic
SNMPv3 encrypted authentication and access security
Https / SSH / SSL enhance network security
Web and CLI authentication and authorization
IP source guard

Software Features

Routing protocols – static routing, RIP v1/v2, OSPF, BGP, DVMRP, PIM-SM, PIM-DM
VRRP for router redundancy
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static)
MMRP and MVRP
MSTP/RSTP/STP Ethernet redundancy
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TCP/IP stack for IPv4 and IPv6 (including ARP, ICMP, ND, UDP)
GARP, GMRP and GVRP
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
Private VLANs
PVRST+ (Per VLAN Rapid Spanning Tree Protocol - enhanced)
Q-in-Q VLAN tunneling and provider bridging
IGMP snooping/filtering/Proxy
RADIUS client
SNMP v1/v2c/v3 agent and MIB support
IP-based bandwidth management
Application-based QoS management
DHCP Server/Client/Relay for IPv4
SMTP Client
SNTP Server
TFTP

Industrial ProtocolModbus TCP
Network Redundancy

O-Ring
O-Chain
MSTP/RSTP/STP

RS-232 Serial Console PortRS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1, and support backup unit
LED Indicators 
System Ready Indicator (PWR)Green: Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2)Green : Power LED x 2
Ring Master Indicator (R.M.)Green: Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)

Green : Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken. .

Fault Indicator (Fault)Amber : Indicate unexpected event occurred
Reset To Default Running Indicator (DEF)Green : System resets to default configuration
Supervisor Login Indicator (RMT)Green : System is accessed remotely
Smart LED Display system

Link (LINK) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Mode select Button (MODE) : Link(LINK) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button
Port 1 ~ 28 Link LED show : Green x 28

Fault Contact 
RelayRelay output to carry capacity of 1A at 24VDC
Power 
Redundant power input modularDual 24/48VDC (24~72VDC) power inputs at terminal block

Dual 100~240VAC / 100~370VDC power inputs at terminal block

Power Consumption (Typ.)46Watts max.43.5Watts max.
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent
Physical Characteristics 
Enclosure19 inches rack mountable
Dimensions (W x D x H)440(W) x 325(D) x 44(H) mm (17.32x12.8x1.73 inches)
Weight (g)4610g4950g4760g5100g
Environmental 
Storage Temperature-40 to 85oC (-40 to 185 oF)
Operating Temperature-40 to 75 oC (-40 to 158 oF)-20 to 60oC(-40 to 140 oF)-40 to 75 oC(-40 to 158 oF)-20 to 60oC(-40 to 140 oF)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals 
EMCEN 55022, EN 55024 (CE EMC), EN 50121-1, EN 50121-4, FCC, IEC 61000-3-2, IEC 61000-3-3
EMICISPR 22, FCC Part 15B Class A
EMSIEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP)
EMSIEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP)
ShockIEC 60068-2-27
Free FallIEC 60068-2-31
VibrationIEC 60068-2-6
SafetyEN60950-1
Power AutomationIEC 61850-3, IEEE 1613 (pending)
MTBF(mean time between failures)130,166hrs
Warranty5 years

Bình luận