RGPS-9084GP-P Series

  • RGPS-9084GP-PEU
  • Oring Network

RGPS-9084GP-P is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、Fast Recovery

RGPS-9084GP-P is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、Fast Recovery、*note MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-9084GP-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts (-40 ~ 60°C provided total 240watts max., and 60 to 75°C provided total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-9084GP-P switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40°C to 75°C. RGPS-9084GP-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices and highly-managed Ethernet application.

Features

  -  Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy

  -  Open-Ring support the other vendor's ring technology in open architecture

  -  O-Chain allow multiple redundant network rings

  -  *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function

  -  Supports IEEE 802.3at compliant PoE 30Watts per port

  -  Supports PoE scheduled configuration and PoE alive check function

  -  Support IEEE 1588v2 clock Synchronization

  -  Supports IPV6 new internet protocol version

  -  Supports backup unit device DBU-01 to quickly configuration backup/restore

*NOTE: This function is available by request only

 

 Specifications
ORing Switch ModelRGPS-9084GP-P
Physical Ports 

10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E

8
-40 ~ 60°C : provided total 240watts maximum, 60 ~ 75°C : provided total 120watts maximum
100/1000Base-X SFP Port4
Technology 
Ethernet Standards

IEEE 802.3 for 10BaseT
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification

MAC Table8k
Packet Buffer4Mbits
Priority Queues8
ProcessingStore-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 24Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define

Security Features

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security

Jumbo frameUp to 9.6K Bytes
Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server

Network Redundancy

O-Ring
Open-Ring
O-Chain
Fast Recovery
*note MRP
MSTP (RSTP/STP compatible)

RS-232 Serial Console PortRS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 (support backup unit DBU-01)
LED Indicators 
Power indicator (PWR)Green : Power indicator
Ring Master Indicator (R.M.)Green : Indicate system operated in O-Ring Master mode
O-Ring Indicator (Ring)Green : Indicate system operated in O-Ring mode. Blinking to indicate Ring is broken.
PoE indicatorBlue : PoE LED x 8
10/100/1000Base-T(X) RJ45 port indicator

Green for port Link/Act.
Dual color LED for speed indicator ~ Green (1000Mbps) / Amber (100Mbps) / Off-light (10Mbps)

100/1000Base-X SFP port indicatorGreen for port Link/Act.
Power 

Power Input

AC 100~240V/AC, 50~60Hz

Power Consumption (Type.)

260Watts (PoE output included)

Overload current protection

Present

Physical Characteristic 

Enclosure

19 inches rack mountable

Dimension (W x D x H)

443.7(W)x230(D)x44(H) mm (17.47 x 9.1 x 1.73inch)

Weight (g)

3,730 g
Environmental 
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory approvals 
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
Warranty5 years

                                     *NOTE: This function is available by request only

Bình luận