IMC-P111FX Series

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85°C and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments. IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.

IMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-111 series is reliable media converter and can satisfy most demand of operating environment.

Features

  -  Designed for Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613

  -  Leading EN50155-compliant Ethernet switch for rolling stock application

  -  Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X

  -  Support Ethernet to fiber or Ethernet to SFP port

  -  Support LFP (Link Fault Pass-through) function

  -  Supports full/half duplex operation

  -  Supports store and forward transmission

  -  Supports relay output for power failed alarm

  -  Provided DIP-Switch to setting function

  -  High reliability and rigid IP-30 housing

  -  DIN-Rail and wall mounting enabled

 Specifications
ORing Switch ModelIMC-P111FX-MMIMC-P111FX-SSIMC-P111P
Physical Ports   

10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX

111
Fiber Ports Number11-
Fiber Ports Standard100Base - FX100Base - FX-
Fiber ModeMulti-modeSingle-mode 
Fiber Diameter (μm)

62.5/125 μm
50/125 μm

9/125 μm-
Fiber Optical ConnectorSCSC-
Typical Distance (km)2 km30 km-
Wavelength (nm)1310 nm1310 nm-
Max. Output Optical Power (dBm)-14 dBm-8 dBm-
Min. Output Optical Power (dBm)-23.5 dBm-15 dBm-
Max. Input Optical Power(Saturation)0 dBm0 dBm-
Min. Input Optical Power (Sensitivity)-31 dBm-34 dBm-
Link Budget (dB)7.5 dB19 dB-
100Base-FX SFP port--1
Technology   
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X) and 100Base-FX
IEEE 802.3x for Flow control

ProcessingStore-and-Forward
DIP-Switch setting

DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

LED Indicators   
Power IndicatorGreen : Power LED x 3 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator

Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

100Base-FX fiber port indicator

Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Amber for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

LFP status indicatorAmber LED – (ON) LFP function fail / (OFF) LFP function disable
Fault indicatorAmber : Indicate unexpected event occurred
Duplex indicatorGreen for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
Power   
LV Model Input PowerTriple DC inputs. Dual 12~48VDC on 7-pin terminal block, one 12~45VDC on power jack
HV Model Input PowerDual 100~240VAC power inputs on 8-pin terminal block
Power consumption (Typ.)

LV model : 12 Watts,
HV model : 100VAC/4.8Watts,
240VAC/5.8Watts

LV model : 12 Watts
HV model : 100VAC/4.8Watts,
240VAC/5.8Watts

LV model : 12 Watts
HV model : 100VAC/4.8Watts,
240VAC/5.8Watts

Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent on terminal block
Physical Characteristics   
EnclosureIP-30
Dimensions (W x D x H)52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g)

LV model : 660 g
HL model : 802 g

LV model : 660 g
HL model : 802 g

LV model : 650g
HV model : 792g

Environmental   
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 85°C (-40 to 185°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals   
Power AutomationIEC 61850-3, IEEE 1613
EMIFCC Part 15, CISPR (EN55022) class A
EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years

Bình luận