IMC-111FB Series

IMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-111 series with wide operating temperature range from -40 ~ 70°C and accepts a wide voltage range from dual 12 ~ 48 VDC power inputs, so it is suitable for harsh operating environments.

IMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-111 series with wide operating temperature range from -40 ~ 70°C and accepts a wide voltage range from dual 12 ~ 48 VDC power inputs, so it is suitable for harsh operating environments.

IMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-111 series is reliable media converter and can satisfy most demand of operating environment.

Features

  -  Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X

  -  Support Ethernet to fiber or Ethernet to SFP port

  -  Support LFP (Link Fault Pass-through) function

  -  Supports full/half duplex operationDIN-Rail and wall mounting enabled

  -  Supports store and forward transmission

  -  Provided DIP-Switch to setting function

  -  High reliability and rigid IP-30 housing

  -  DIN-Rail and panel mounting enabled

 

 Specifications
ORing Switch ModelIMC-111FB-MMIMC-111FB-SSIMC-111PB
Physical Ports   

10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX

111
Fiber Ports Number11-
Fiber Ports Standard100Base - FX100Base - FX-
Fiber ModeMulti-modeSingle-mode 
Fiber Diameter (μm)

62.5/125 μm
50/125 μm

9/125 μm-
Fiber Optical ConnectorSCSC-
Typical Distance (km)2 km30 km-
Wavelength (nm)1310 nm1310 nm-
Max. Output Optical Power (dBm)-14 dBm-8 dBm-
Min. Output Optical Power (dBm)-23.5 dBm-15 dBm-
Max. Input Optical Power(Saturation)0 dBm0 dBm-
Min. Input Optical Power (Sensitivity)-31 dBm-34 dBm-
Link Budget (dB)7.5 dB19 dB-
100Base-FX SFP port--1
Technology   
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control

ProcessingStore-and-Forward
DIP-Switch setting

DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex

LED Indicators   
Power IndicatorGreen : Power LED x 2
10/100Base-T(X) RJ45 Port Indicator

Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for 100Mbps/10Mbps indicator – (ON) Link at 100Mbps / (OFF) Link at 10Mbps
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

100Base-FX Fiber Port Indicator

Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex

LFP status indicatorAmber LED – (ON) LFP function fail / (OFF) LFP function disable
Power   
Input PowerDual 12~48 VDC power input at 4-pin terminal block
Power Consumption (Typ.)2.2 Watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent on terminal block
Physical Characteristics   
EnclosureIP-30
Dimensions (W x D x H)26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)218 g218 g213 g
Environmental   
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals   
EMIFCC Part 15, CISPR (EN55022) class A
EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years

Bình luận