IGS-P9812GP Series

IGS-P9812GP is IEC 61850-3 managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. And the switch designed for the toughest and fully compliant with EN50155 requirement.

IGS-P9812GP is IEC 61850-3 managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. And the switch designed for the toughest and fully compliant with EN50155 requirement. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-P9812GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application.

Features:

  -  Designed for power substation / Railway application and fully compliant with the -requirement of IEC 61850-3 and IEEE 1613

  -  Leading EN50155-compliant Ethernet switch for rolling stock application

  -  Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy

  -  Open-Ring support the other vendor's ring technology in open architecture

  -  O-Chain allow multiple redundant network rings

  -  *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function

  -  Support IEEE 1588v2 clock Synchronization

  -  Support IPV6 new internet protocol version

  -  Support ModbusTCP protocol

  -  Support IEEE 802.3azEnergy-Efficient Ethernet technology

  -  Provided HTTPS/SSH protocol to enhance network security

  -  Support SMTP client & NTP server

  -  Support IP-based bandwidth management

  -  Support application-based QoS management

  -  Supports backup unit device DBU-01 to quickly configuration backup/restore

*NOTE: This function is available by request only

Specification

 Specifications
ORing Switch ModelIGS-P9812GP-LVIGS-P9812GP-HV
Physical Ports 
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX8
100/1000Base-X SFP Port12
Technology 
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)

MAC Table8K
Priority Queues4
ProcessingStore-and-Forward
Switch Properties

Switching latency: 7 us
Switching bandwidth: 40Gbps
Max. Number of Available VLANs: 4095
VLAN ID Range: VID 1 to 4094
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define
Https / SSH enhance network security

Jumbo frameUp to 9.6K Bytes
Security Featues

Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security

Software Features

STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
NTP Server
SNMP v1/v2c/v3, MIB, RMON
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
NTP server

Network Redundancy

O-Ring
Open-Ring
O-Chain
*note MRP
Fast Recovery
MSTP (RSTP/STP compatible)

RS-232 Serial Console PortRS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1
LED Indicators 
Power IndicatorGreen : Power LED x 3
Ring Master Indicator (R.M.)Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault)Amber : Indicates unexpected event occurred
10/100/1000Base-T(X) RJ45 port IndicatorGreen for Link/Act.
Dual color LED for speed indicator: Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps
100/1000Base-X SFP port IndicatorGreen for port Link/Act.
Fault Contact 
RelayRelay output to carry capacity of 1A at 24VDC
Power 
Redundant Input PowerDual DC inputs. 12~48 VDC on 6-pin terminal blockDual power inputs. 85~264VAC / 88~373VDC on 6-pin terminal block
Power Consumption (Typ.)22 Watts24 Watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent
Physical Characteristics 
EnclosureIP-30
Dimensions (W x D x H)115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.26 x 6.06 inch)
Weight (g)1520 g1870 g
Environmental 
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals 
Power AutomationIEC 61850-3, IEEE 1613
EMIFCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years

 *NOTE: This function is available by request only

Bình luận