IGR-20 Series

IGR-20 series is a reliable VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 2 modes of routing function: Dynamic/Static IP route, PPPoE authentication. 

IGR-20 series is a reliable VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 2 modes of routing function: Dynamic/Static IP route, PPPoE authentication. In addition, IGR-20+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGR-20+ is one of the best solution for applications of VPN connection.

Features

  -  Provide 2 port 10/100/1000Base-T(X) port

  -  Secured Management by HTTPs

  -  Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE

  -  IP table to prevent access from unauthorized IP address

  -  Support VPN for secured network connection (Open VPN, PPTP, IPSEC, VPN)

  -  Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)

  -  Versatile modes & event alarm by e-mail

  -  1KV isolation for PoE P.D. port (IGR-20+)

  -  Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper

  -  Rigid IP-30 housing design

  -  DIN-Rail and Wall-mount enabled

 Specifications
ORing Router ModelIGR-20IGR-20+
Physical Ports 

10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX

2
PoE P.D. port-

Present at ETH2
Fully compliant with IEEE 802.3af Power Device specification
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min

5-Pin Terminal Block

2(DI x 4 and DO x 4) :
Dry Contact:
On: short to GND, Off: open
Wet Contact (DI to COM/GND):
On: 0 to 3VDC, Off: 10 to 30VDC

LED Indicators 
Power Indicator

3 x LEDs, PWR1(2)(PoE) / Ready:
Red On : Power is on and booting up
Green On : Power is on and functioning Normal

10/100/1000T RJ45 port indicator

2 x LEDs,
LNK/ACT:Green for port Act.
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps

Fault1 x LED, Red for Ethernet link down or power down indicator
Fault Contact 
RelayRelay output to carry capacity of 1A at 24VDC
Power 
Redundant Input powerDual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption4 Watts5 Watts
Overload current protectionPresent
Reverse polarity protectionPresent
Physical Characteristics 
EnclosureIP-30
Dimensions (W x D x H)74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight (g)845 g850 g
Environmental 
Storage Temperature-40 to 85°C(-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals 
EMIFCC Part 15, CISPR (EN55022) class A
EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

ShockIEC60068-2-27
Free FallIEC60068-2-31
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years

 

Bình luận