IGMC-111GP

The IGMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGMC-111GP supports MDI/MDIX auto detection, so you don’t need to use crossover wires.

The IGMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGMC-111GP supports MDI/MDIX auto detection, so you don’t need to use crossover wires.

The IGMC-111GP also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

The IGMC-111GP with wide operating temperature range from -40 ~ 75°C and accepts a wide voltage range from dual 12~48 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGMC-111GP is reliable media converter and can satisfy most demand of operating environment.

Features

  -  Support 1 port 10/100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X copper port

  -  Support 1 port 100/1000Base-X SFP fiber port

  -  Support Jumbo Frame up to 9K Bytes

  -  Support LFP (Link Fault Pass-through) function

  -  Ø Relay output to carry capacity of 1A at 24 VDC for warning system

  -  Ø Provided DIP-Switch to setting function

  -  Ø Rigid IP-30 housing design

  -  Ø DIN-Rail and wall mounting enabled

 Specifications
ORing Media Converter ModelIGMC-111GP
Physical Ports 
10/100/1000 Base-T(X) Port in RJ45 Auto MDI/MDIX1
100/1000Base-X SFP port1
Technology 
Ethernet Standards

IEEE 802.3i for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X

Jumbo Frame

9K Bytes (1G mode only)

LED Indicators 
Power / Ready IndicatorGreen: Power LED x 2
LFP statue indicatorAmber LED – (ON) LFP function fail / (OFF) LFP function disable
100/1000Base-X SFP Port IndicatorGreen for port Link/Act
10/100/1000Base-T(X) Port Duplex Mode IndicatorGreen LED – (ON) Full-duplex mode / (OFF) Half-Duplex mode
10/100/1000Base-T(X) RJ45 port
Indicator

Green for Link/Act
Dual color LED for speed – Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps

Fault Indicator (Fault)Amber : Indicate unexpected event occurred
Fault Contact 
RelayRelay output to carry capacity of 1A at 24 VDC
Power 
Input PowerDual 12~ 48 VDC voltage power inputs in 4-pin terminal block
Power Consumption (Typ.)4Watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent
Physical Characteristics 
EnclosureIP-30
Dimensions (W x D x H)40 (W) x70 (D) x 95 (H) mm
Weight (g)291g
Environmental 
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals 
EMIFCC Part 15, CISPR (EN55022) class A
EMSEN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years

Bình luận