IES-1062GF Series

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.

Features

  -  IES-1080 provide 8x10/100Base-T(X) ports 

  -  IES-1062GT provide 6x10/100Base-T(X) and 2x10/100/1000Base-T(X) ports 

  -  IES-1062FX series provide 6x10/100Base-T(X) and 2x100Base-FX fiber ports 

  -  IES-1062GF series provide 6x10/100Base-T(X) and 2x1000Base-X fiber ports 

  -  Triple redundant DC power inputs of terminal block and power jack 

  -  Support auto-negotiation and auto-MDI/MDI-X 

  -  Support store and forw ard transmission 

  -  Support flow control 

  -  Warning system by relay output 

  -  Rigid IP-30 housing design 

  -  DIN-Rail and wall mounting enabled

 Specifications
ORing Switch ModelIES -1062GF-MM-SCIES -1062GF-SS-SC
Physical Ports 
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX66
Fiber Ports Number22
Fiber Ports Standard1000Base-SX1000Base-LX
Fiber ModeMulti-modeSingle-mode
Fiber Diameter (μm)62.5/125 μm9/125 μm
50/125 μm
Fiber Optical ConnectorSCSC
Fiber Ports Specifications Typical Distance (km)0.55 km10 km
Wavelength (nm)850 nm1310 nm
Max. Output Optical Power (dBm)-4 dBm-3 dBm
Min. Output Optical Power (dBm)-9.5 dBm-9.5 dBm
Max. Input Optical Power(Saturation)0 dBm-3 dBm
Min. Input Optical Power (Sensitivity)-18 dBm-20 dBm
Link Budget (dB)8.5 dB10.5 dB
Technology  
Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
MAC Table8192  MAC addresses
ProcessingStore-and-Forward
LED Indicators  
Power IndicatorGreen : Power LED x 3
Fault IndicatorAmber : Indicates PWR1 or PWR2 failure occurred
10/100Base-FX RJ45 Port IndicatorGreen for port Link/Act. Amber for Duplex/Collision
10/100/1000Base-T(X) / Fiber Port IndicatorGreen for port Link/Act. Amber for Link
Fault contact  
RelayRelay output to carry capacity of 1A at 24VDC
Power  
Redundant Input PowerTriple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Power Consumption (Typ.)6 watts6 watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent on terminal block
Physical Characteristics  
EnclosureIP-30
Dimensions (W x D x H)52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g)685 g685 g
Environmental  
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 70°C (-40 to 158°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals  
EMIFCC Part 15, CISPR (EN55022) class A,
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1, UL508(E331061)
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )370,965370,965
Warranty5 years

Bình luận