IES-1042FX Series

IES-1041FX/1042FX series are unmanaged Ethernet switches with 4 x 10/100Base-T(X) and 100Base-FX ports. IES-1041FX/1042FX series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.

IES-1041FX/1042FX series are unmanaged Ethernet switches with 4 x 10/100Base-T(X) and 100Base-FX ports. IES-1041FX/1042FX series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.

  -  IES-1041FX series provide 4x10/100Base-T(X) and 1x100Base-FX single/multi-mode fiber ports

  -  IES-1042FX series provide 4x10/100Base-T(X) and 2x100Base-FX single/multi-mode fiber ports

  -  Support auto-negotiation and auto-MDI/MDI-X

  -  Support store-and-forward transmission

  -  Support flow control

  -  Support surge protection technology

  -  Warning system by relay output

  -  Rigid IP-30 housing design

  -  DIN-Rail and wall mounting enabled

 Specifications
ORing Switch ModelIES-1042FX-MM-SCIES-1042FX-SS-SC
Physical Ports 
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX4
Fiber Ports Number22
Fiber Ports Standard100Base-FX100Base-FX
Fiber ModeMulti-modeSingle-mode
Fiber Diameter (μm)

62.5/125 μm
50/125 μm

9/125 μm
Fiber Optical ConnectorSCSC
Typical Distance (km)2 km30 km
Wavelength (nm)1310 nm1310 nm

Max. Output Optical Power (dBm)

-14 dBm-8 dBm

Min. Output Optical Power (dBm)

-23.5 dBm-15 dBm

Max. Input Optical Power (Saturation)

0 dBm0 dBm

Min. Input Optical Power
(Sensitivity)

-31 dBm-34 dBm

Link Budget (dB)

7.5 dB19 dB
Technology 
Ethernet Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control

MAC Table2048 MAC addresses
ProcessingStore-and-Forward
LED Indicators 
Power IndicatorGreen : Power LED x 2
Fault IndicatorAmber : Indicates PWR1 or PWR2 failure occurred
10/100Base-T(X) RJ45 Port IndicatorGreen for port Link/Act. Amber for Duplex/Collision
Fiber Port LEDGreen for port Link/Act.
Fault Contact 
RelayRelay output to carry capacity of 1A at 24VDC
Power 
Redundant Input PowerDual DC inputs: 12~48VDC on 6-pin terminal block
Power Consumption (Typ.)7 Watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent
Physical Characteristics 
EnclosureIP-30
Dimensions (W x D x H)26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.)
Weight (g)382 g
Environmental 
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals 
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years

 

Bình luận