IDS-322 Series

IDS-322 is an innovative secure 2 port RS-232/422/485 to 2 ports LAN secure device server with standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com

IDS-322 is an innovative secure 2 port RS-232/422/485 to 2 ports LAN secure device server with standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. On the other hand, IDS-322 can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-322 features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
IDS-322 supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. Further, IDS-322+ features PoE PD (Power Device) function, compliant with IEEE802.3af standard, with 1kv isolation on the PoE port. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-322 series could operate in the harsh industrial environment. Therefore, IDS-322 is the best solution to the high demand of secure serial to Ethernet critical data communication.

Features

  -  Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP

  -  Support 2xRS-232/422/485 in DB9 connector

  -  Redundant multiple host devices:

                   5 host devices: Virtual COM, TCP Server, TCP Client mode;
                   4 IP ranges: UDP

  -  Security: SSL data encryption; secured management by HTTPS and SSH:IP Access: IP White List

  -  Event Warning by Syslog, Email, SNMP trap, Relay and Beeper

  -  Configurable by Web-based and Windows utility (DS-Tool)

  -  Various Windows O.S. supported:Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)

  -  Ethernet switch mode enable Daisy Chain

  -  1KV isolation for PoE PD port (IDS-322+)

 Specifications
ORing Device Server ModelIDS-322IDS-322+
Physical Ports  

10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX

2
P.O.E. 

P.O.E.Present at ETH1
Power Device (IEEE 802.3af):
IEEE 802.3af compliant input interface
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min

Serial Ports  
ConnectorDB9 x 4
Operation ModeRS-232/422/485
Serial Baud Rate110 bps to 460.8 Kbps
Data Bits7, 8
Parityodd, even, none, mark, space
Stop Bits1, 1.5, 2
RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow ControlXON/XOFF, RTS/CTS, DTR/DSR
Network Protocol  
ProtocolICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP
LED Indicators  
Power Indicator

3 x LEDs, PWR 1(2)(PoE) / Ready:
Green On: Power is on

10/100/1000 RJ45 port indicatorGreen for port Link/Act at 100Mbps.
Serial TX / RX LEDsRed: Serial port is receiving data
Green: Serial port is transmitting data
Power  
Redundant Input PowerDual DC inputs. 12-48VDC on 6-pin terminal blockDual DC inputs. 12-48VDC on 6-pin terminal block
IEEE 802.3af PoE PD (Eth 1)
Power Consumption (Typ.)3.84W
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent on terminal block
Physical Characteristics  
EnclosureIP-30
Dimensions (W x D x H)45 (W) x 81 (D) x 95 (H) mm
Weight (g)316g325g
Environmental  
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 70°C (-40 to 158°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals  
EMIFCC Part 15, CISPR (EN55022) class A
EMS

IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11

ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years

Bình luận